Empiece

Buscar en scripts para "volume profile"

HVN Boundary Assist FRVP + ATR Tempo Auto TF Defaults (LOCKED)This indicator is a structure-assist tool, not a signal generator. It is designed to standardize High-Volume Node (HVN) boundary placement and evaluation when using TradingView’s Fixed Range Volume Profile (FRVP) on weekly and monthly timeframes. The script does not attempt to discover HVNs automatically. The trader selects the HVN visually using FRVP and inputs the HVN center (effective VPOC). From there, the script applies consistent, rules-based logic to define boundaries, track interaction, and prevent lower-timeframe levels from conflicting with higher-timeframe structure. What the indicator does 1. Standardizes HVN boundary placement Using the active timeframe’s ATR, the indicator identifies the first candle that regains tempo on each side of the HVN center. A valid boundary requires: A bar range ≥ a fixed fraction of ATR A close that breaks prior rotational overlap The close of that candle becomes the candidate HVN high or low. Wicks are ignored for structure. 2. Automatically adapts to timeframe The indicator enforces locked system defaults: Weekly: 0.33 ATR expansion, 10-bar overlap lookback Monthly: 0.25 ATR expansion, 8-bar overlap lookback These values adjust automatically based on chart timeframe, eliminating discretionary tuning. 3. Tracks retests without redefining structure HVN interaction is tracked via wick touches within a tight ATR-based tolerance. Retests are informational only and never move boundaries. This captures recognition and rejection behavior without violating close-based structure rules. 4. Ranks HVN strength (0–3) Each HVN is scored using: Tightness relative to ATR Relative volume confirmation Presence of at least one retest This produces a simple, comparable strength ranking without overfitting. 5. Enforces clean monthly → weekly nesting An optional monthly gate restricts weekly logic to operate only inside a defined monthly HVN. If conflicts arise, monthly structure always overrides weekly, preventing level overlap and structural ambiguity. What the indicator does NOT do It does not read FRVP data (TradingView limitation) It does not auto-detect HVNs It does not generate trade signals It exists to remove subjectivity and inconsistency from HVN boundary placement and evaluation. Intended use Apply FRVP and visually identify the HVN Enter the HVN center price into the indicator Let the script define precise boundaries and interaction metrics Use monthly HVNs as structural rails and weekly HVNs for execution Design philosophy Structure is defined by closes and volatility, not wicks Retests measure recognition, not acceptance Higher timeframe structure always dominates This tool enforces those rules mechanically so the trader doesn’t have to.
Indicador Pine Script®
por jackes87
Group 0HVN Boundary Assist FRVP + ATR Tempo Auto TF DefaultsThis indicator is a structure-assist tool, not a signal generator. It is designed to standardize High-Volume Node (HVN) boundary placement and evaluation when using TradingView’s Fixed Range Volume Profile (FRVP) on weekly and monthly timeframes. The script does not attempt to discover HVNs automatically. The trader selects the HVN visually using FRVP and inputs the HVN center (effective VPOC). From there, the script applies consistent, rules-based logic to define boundaries, track interaction, and prevent lower-timeframe levels from conflicting with higher-timeframe structure. What the indicator does 1. Standardizes HVN boundary placement Using the active timeframe’s ATR, the indicator identifies the first candle that regains tempo on each side of the HVN center. A valid boundary requires: A bar range ≥ a fixed fraction of ATR A close that breaks prior rotational overlap The close of that candle becomes the candidate HVN high or low. Wicks are ignored for structure. 2. Automatically adapts to timeframe The indicator enforces locked system defaults: Weekly: 0.33 ATR expansion, 10-bar overlap lookback Monthly: 0.25 ATR expansion, 8-bar overlap lookback These values adjust automatically based on chart timeframe, eliminating discretionary tuning. 3. Tracks retests without redefining structure HVN interaction is tracked via wick touches within a tight ATR-based tolerance. Retests are informational only and never move boundaries. This captures recognition and rejection behavior without violating close-based structure rules. 4. Ranks HVN strength (0–3) Each HVN is scored using: Tightness relative to ATR Relative volume confirmation Presence of at least one retest This produces a simple, comparable strength ranking without overfitting. 5. Enforces clean monthly → weekly nesting An optional monthly gate restricts weekly logic to operate only inside a defined monthly HVN. If conflicts arise, monthly structure always overrides weekly, preventing level overlap and structural ambiguity. What the indicator does NOT do It does not read FRVP data (TradingView limitation) It does not auto-detect HVNs It does not generate trade signals It exists to remove subjectivity and inconsistency from HVN boundary placement and evaluation. Intended use Apply FRVP and visually identify the HVN Enter the HVN center price into the indicator Let the script define precise boundaries and interaction metrics Use monthly HVNs as structural rails and weekly HVNs for execution Design philosophy Structure is defined by closes and volatility, not wicks Retests measure recognition, not acceptance Higher timeframe structure always dominates This tool enforces those rules mechanically so the trader doesn’t have to.
Indicador Pine Script®
por jackes87
TPOSmartMoneyLibLibrary "TPOSmartMoneyLib" Library for TPO (Time Price Opportunity) and Smart Money concepts including session management, PDH/PDL detection, sweeping logic, and volume profile utilities f_price_to_tick(p)   Convert price to tick   Parameters:      p (float) : Price value   Returns: Tick value f_tick_to_row(t, row_ticks_in)   Convert tick to row   Parameters:      t (int) : Tick value      row_ticks_in (int) : Number of ticks per row   Returns: Row index f_row_to_price(row, row_ticks_in)   Convert row to price (midpoint)   Parameters:      row (int) : Row index      row_ticks_in (int) : Number of ticks per row   Returns: Price at row midpoint f_calc_row_ticks(natr_ref, row_gran_mult)   Calculate dynamic row size based on normalized ATR   Parameters:      natr_ref (float) : Daily normalized ATR reference value      row_gran_mult (float) : Row granularity multiplier   Returns: Number of ticks per row f_more_transp_pct(c, pct)   Increase color transparency by percentage   Parameters:      c (color) : Input color      pct (float) : Percentage to increase transparency (0.0 to 1.0)   Returns: Color with increased transparency f_dom_color(dom, buy_col, sell_col, gamma, transp_weak, transp_strong)   Calculate dominance color based on buy/sell ratio   Parameters:      dom (float) : Dominance ratio (-1 to 1, negative = sell, positive = buy)      buy_col (color) : Buy dominant color      sell_col (color) : Sell dominant color      gamma (float) : Gamma correction for color intensity      transp_weak (int) : Transparency for weak dominance      transp_strong (int) : Transparency for strong dominance   Returns: Blended color f_sess_part(sess_str, get_start)   Parse session string to get start or end time   Parameters:      sess_str (string) : Session string in format "HHMM-HHMM"      get_start (bool) : True to get start time, false to get end time   Returns: Time string in HHMM format f_hhmm_to_h(hhmm)   Convert HHMM string to hours   Parameters:      hhmm (string) : Time string in HHMM format   Returns: Hours (0-23) f_hhmm_to_m(hhmm)   Convert HHMM string to minutes   Parameters:      hhmm (string) : Time string in HHMM format   Returns: Minutes (0-59) f_prev_day_window_bounds(today_day_rth, win_start, win_end, session_tz)   Calculate previous day window bounds   Parameters:      today_day_rth (int) : Today's RTH start timestamp      win_start (string) : Window start time in HHMM format      win_end (string) : Window end time in HHMM format      session_tz (string) : Session timezone   Returns: Tuple of f_default_session_colors()   Get default session colors   Returns: Array of 4 colors f_session_names()   Get session names   Returns: Array of 4 session names f_process_hl(arr, rng, keep_bars, lock_to_live)   Process high/low lines with sweeping detection   Parameters:      arr (array) : Array of HLLine objects      rng (float) : Price range for visibility filtering      keep_bars (int) : Maximum bars to keep lines      lock_to_live (bool) : Whether to lock line end to current bar   Returns: 0 (for chaining) f_process_naked_lines(arr, calc_bars, bars_per_day, keep_to_day_end)   Process naked lines (POC/VAH/VAL) with sweeping detection   Parameters:      arr (array) : Array of NakedLine objects      calc_bars (int) : Maximum calculation bars      bars_per_day (int) : Bars per day for scope calculation      keep_to_day_end (bool) : Whether to extend to day end   Returns: 0 (for chaining) f_update_pdhl_lines(pd_hl, pdh, pdl, new_day, pd_rng, bars_per_day, pdh_color, pdl_color)   Detect and create PDH/PDL lines   Parameters:      pd_hl (array) : Array to store HLLine objects      pdh (float) : Previous day high      pdl (float) : Previous day low      new_day (bool) : Whether it's a new day      pd_rng (float) : Price range for visibility      bars_per_day (int) : Bars per day      pdh_color (color) : PDH line color      pdl_color (color) : PDL line color   Returns: 0 (for chaining) f_poc_from_vals(keys, vals)   Calculate POC from sorted keys and values   Parameters:      keys (array) : Sorted array of row keys      vals (array) : Array of volume values   Returns: POC row key f_value_area(keys, vals, poc_key, va_pct)   Calculate Value Area from volume distribution   Parameters:      keys (array) : Sorted array of row keys      vals (array) : Array of volume values      poc_key (int) : POC row key      va_pct (float) : Value Area percentage (typically 0.70)   Returns: Tuple of f_find_key_sorted(keys, target)   Find key in sorted array using binary search   Parameters:      keys (array) : Sorted array of keys      target (int) : Target key to find   Returns: Index of key, or -1 if not found f_zscore_safe(x, len)   Safe z-score calculation using built-in functions   Parameters:      x (float) : Input series      len (int) : Lookback length   Returns: Z-score HLLine   Represents a high/low line with sweeping detection   Fields:      ln (series line) : Line object      lb (series label) : Label object      lvl (series float) : Price level      startBar (series int) : Bar index where line starts      swept (series bool) : Whether the level has been swept      isHigh (series bool) : True if this is a high, false if low      col (series color) : Line color NakedLine   Represents a naked POC/VAH/VAL line   Fields:      ln (series line) : Line object      lb (series label) : Label object      lvl (series float) : Price level      startBar (series int) : Bar index where line starts      swept (series bool) : Whether the level has been swept      sweptBar (series int) : Bar index where swept occurred      endBar (series int) : Bar index where line should end
Biblioteca Pine Script®
por cybermediaboy
Weis Wave Renko Panel 2 (Effort / Strength / Climax)Weis Wave Renko • Institutional HUD + Panel 2 Wyckoff / Auction Market Framework This project consists of TWO COMPLEMENTARY INDICATORS, designed to be used together as a complete visual framework for reading Effort vs Result, Auction Direction, and Session Control, based on Wyckoff methodology and Auction Market Theory. These tools are not trade signal generators. They are context and decision-support instruments, built for discretionary traders who want to understand who is active, where effort is occurring, and when the auction is reaching maturity or exhaustion. 🔹 1) WEIS WAVE RENKO — INSTITUTIONAL HUD (Overlay) 📍 Location: Plotted directly on the price chart 🎯 Purpose: Fast, high-level institutional context and trade permission The HUD answers: “What is the current state of the auction, and is trading permitted?” What the HUD shows: 🧠 Market Participation Measures how much participation is present in the market: Low Participation Weak Participation Active Participation Dominant Participation This reflects whether professional activity is present or absent, not direction alone. 📐 Auction Direction Defines how the auction is currently resolving: Auction Up Auction Down Balanced Auction This is derived from price progression and effort alignment. 🔥 Effort (Effort vs Result) Displays the relative strength of the current effort, normalized over recent waves: Visual effort bar Strength percentage (0–100) Effort classification: Low Effort Increasing Effort Strong Effort Effort Exhaustion This is the core Wyckoff concept: effort must produce result. 🌐 Session Control Shows which trading session is controlling the auction: Asia – Accumulation Phase London – Development Phase US RTH – Decision Phase The dominant session is visually emphasized, while others are intentionally de-emphasized. 🔎 Market State & Trade Permission Clearly separates structure from permission: Structure (Neutral, Developing, Trending, Climactic Extension) Permission Trade Permitted No Trade Zone When Effort Exhaustion is detected, the HUD explicitly signals No Trade Zone. 🔹 2) WEIS WAVE RENKO — PANEL 2 (Lower Pane) 📍 Location: Dedicated lower pane below the price chart 🎯 Purpose: Detailed, continuous visualization of effort, strength, and climax Panel 2 answers: “How is effort evolving, and is the auction maturing or exhausting?” What Panel 2 shows: 📊 Effort Wave (Weis-like) Histogram of accumulated effort per directional wave Green: Auction Up effort Red: Auction Down effort This reveals where real participation is building. 📈 Strength Line (0–100) Normalized strength of the current effort wave Same calculation used by the HUD Enables precise comparison of effort over time ⚠️ Climax / Effort Exhaustion Marker Triggered when effort is both strong and mature Highlights Climactic Extension / Exhaustion Serves as a warning, not an entry signal 🔗 HOW TO USE BOTH TOGETHER (IMPORTANT) These indicators are designed to be used simultaneously: Panel 2 reveals → how effort is building, peaking, or exhausting HUD translates that information into → market state and trade permission Typical workflow: Panel 2 identifies rising effort or climax HUD confirms: Participation quality Auction direction Session control Whether trading is permitted or restricted ⚠️ IMPORTANT NOTES These tools do not generate buy or sell signals They are contextual and structural Best used with: Wyckoff schematics Auction-based execution Market profile / volume profile Discretionary trade management 🎯 SUMMARY Institutional, non-lagging framework Effort vs Result at the core Clear separation between: Context Structure Permission Designed for professional discretionary traders
Indicador Pine Script®
por alxgoulart
Weis Wave Renko Institutional HUD (Wyckoff/Auction) v6Weis Wave Renko • Institutional HUD + Panel 2 Wyckoff / Auction Market Framework This project consists of TWO COMPLEMENTARY INDICATORS, designed to be used together as a complete visual framework for reading Effort vs Result, Auction Direction, and Session Control, based on Wyckoff methodology and Auction Market Theory. These tools are not trade signal generators. They are context and decision-support instruments, built for discretionary traders who want to understand who is active, where effort is occurring, and when the auction is reaching maturity or exhaustion. 🔹 1) WEIS WAVE RENKO — INSTITUTIONAL HUD (Overlay) 📍 Location: Plotted directly on the price chart 🎯 Purpose: Fast, high-level institutional context and trade permission The HUD answers: “What is the current state of the auction, and is trading permitted?” What the HUD shows: 🧠 Market Participation Measures how much participation is present in the market: Low Participation Weak Participation Active Participation Dominant Participation This reflects whether professional activity is present or absent, not direction alone. 📐 Auction Direction Defines how the auction is currently resolving: Auction Up Auction Down Balanced Auction This is derived from price progression and effort alignment. 🔥 Effort (Effort vs Result) Displays the relative strength of the current effort, normalized over recent waves: Visual effort bar Strength percentage (0–100) Effort classification: Low Effort Increasing Effort Strong Effort Effort Exhaustion This is the core Wyckoff concept: effort must produce result. 🌐 Session Control Shows which trading session is controlling the auction: Asia – Accumulation Phase London – Development Phase US RTH – Decision Phase The dominant session is visually emphasized, while others are intentionally de-emphasized. 🔎 Market State & Trade Permission Clearly separates structure from permission: Structure (Neutral, Developing, Trending, Climactic Extension) Permission Trade Permitted No Trade Zone When Effort Exhaustion is detected, the HUD explicitly signals No Trade Zone. 🔹 2) WEIS WAVE RENKO — PANEL 2 (Lower Pane) 📍 Location: Dedicated lower pane below the price chart 🎯 Purpose: Detailed, continuous visualization of effort, strength, and climax Panel 2 answers: “How is effort evolving, and is the auction maturing or exhausting?” What Panel 2 shows: 📊 Effort Wave (Weis-like) Histogram of accumulated effort per directional wave Green: Auction Up effort Red: Auction Down effort This reveals where real participation is building. 📈 Strength Line (0–100) Normalized strength of the current effort wave Same calculation used by the HUD Enables precise comparison of effort over time ⚠️ Climax / Effort Exhaustion Marker Triggered when effort is both strong and mature Highlights Climactic Extension / Exhaustion Serves as a warning, not an entry signal 🔗 HOW TO USE BOTH TOGETHER (IMPORTANT) These indicators are designed to be used simultaneously: Panel 2 reveals → how effort is building, peaking, or exhausting HUD translates that information into → market state and trade permission Typical workflow: Panel 2 identifies rising effort or climax HUD confirms: Participation quality Auction direction Session control Whether trading is permitted or restricted ⚠️ IMPORTANT NOTES These tools do not generate buy or sell signals They are contextual and structural Best used with: Wyckoff schematics Auction-based execution Market profile / volume profile Discretionary trade management 🎯 SUMMARY Institutional, non-lagging framework Effort vs Result at the core Clear separation between: Context Structure Permission Designed for professional discretionary traders
Indicador Pine Script®
por alxgoulart
Squeeze Momentum with Trend Exhaustion# Squeeze Momentum + Trend Exhaustion Indicator ## Complete User Manual --- ## Table of Contents 1. (#what-this-indicator-does) 2. (#visual-components) 3. (#market-states) 4. (#how-to-read-signals) 5. (#trading-examples) 6. (#configuration-guide) 7. (#best-practices) --- ## What This Indicator Does This indicator combines two powerful concepts to identify complete market cycles: ### 1. Squeeze Momentum (LazyBear) Detects **volatility compression** (consolidation) and subsequent **expansion** (breakout). **Think of it like:** A spring being compressed, then released. ### 2. Multi-Timeframe Trend Exhaustion Measures how far price has moved from its moving averages across multiple timeframes. **Think of it like:** A rubber band being stretched—eventually it must snap back. ### The Complete Cycle ``` Consolidation → Breakout → Trend → Exhaustion → Reversion → Consolidation ``` This indicator shows you exactly where you are in this cycle. --- ## Visual Components ### Main Panel (Bottom) | Element | What It Looks Like | Meaning | |---------|-------------------|---------| | **Colored Bars** | Green/Red histogram | Momentum strength and direction | | **Filled Area** | Yellow/Lime/Red gradient area | Price extension from moving averages | | **Cross at Zero** | Black/Gray/Blue cross | Squeeze state (volatility) | | **Dashed Lines** | Horizontal red/green lines | Extension thresholds (±2σ scaled) | --- ### 1. Momentum Histogram (Colored Bars) | Color | Direction | Meaning | |-------|-----------|---------| | **Bright Green** (Lime) | Up ↑ | Strong bullish momentum (increasing) | | **Dark Green** | Up ↑ | Weak bullish momentum (decreasing) | | **Bright Red** | Down ↓ | Strong bearish momentum (increasing) | | **Dark Red** (Maroon) | Down ↓ | Weak bearish momentum (decreasing) | **Key insight:** When bars change from bright to dark, momentum is fading. --- ### 2. Extension Area (Filled Gradient) Shows how extended price is from its moving averages across 5 timeframes (5m, 15m, 1h, 4h, Daily). | Color | Position | Meaning | |-------|----------|---------| | **Red** | High above zero | Severely overbought (>2σ scaled) | | **Orange/Yellow** | Above zero | Moderately overbought | | **Lime/Green** | Below zero | Moderately oversold | | **Teal** | Deep below zero | Severely oversold (<-2σ scaled) | **The area is scaled 3x** for better visibility. Actual values shown in table. **Reading it:** - **Area touching upper dashed line** = Price very far above averages (exhaustion territory) - **Area touching lower dashed line** = Price very far below averages (exhaustion territory) - **Area near zero** = Price near its averages (normal/neutral) --- ### 3. Squeeze Indicator (Cross at Zero Line) | Color | Status | Meaning | |-------|--------|---------| | **Black** ⚫ | Squeeze ON | Bollinger Bands inside Keltner Channels → Low volatility, consolidation | | **Gray** ⚪ | Squeeze OFF | Bollinger Bands outside Keltner Channels → Volatility expanding, breakout | | **Blue** 🔵 | No Squeeze | Normal volatility conditions | **Critical:** The transition from Black → Gray is where explosive moves begin. --- ### 4. Entry/Exit Signals | Symbol | Type | Meaning | |--------|------|---------| | 🔺 **Large Green Triangle** | HC Long Entry | High Confidence long setup (Squeeze OFF + Oversold + Confluence) | | 🔻 **Large Red Triangle** | HC Short Entry | High Confidence short setup (Squeeze OFF + Overbought + Confluence) | | 🔺 Small green | Medium Long | Long setup without full confluence | | 🔻 Small red | Medium Short | Short setup without full confluence | | ✕ Orange X | Exit Long | Close long positions (exhaustion detected) | | ✕ Teal X | Exit Short | Close short positions (exhaustion detected) | **Trade only the LARGE triangles** for highest probability setups. --- ## Market States The indicator identifies 7 distinct market states shown in the info table. ### State 1: 💤 CONSOLIDATION **Conditions:** - Squeeze: ON (black cross) - Extension: Near zero (±1σ) - Momentum: Contracting **What's happening:** Price is range-bound, volatility dying down. Spring is being compressed. **Action:** **WAIT.** Do not trade. Set alerts for Squeeze OFF. --- ### State 2: ⚡ BREAKOUT BULL / BEAR **Conditions:** - Squeeze: OFF (gray cross) ← **Key trigger** - Extension: Still moderate - Momentum: Strong directional move (bright green or red bars) **What's happening:** Volatility explosion. Spring released. This is the start of a new trend. **Action:** **ENTER** in direction of momentum. - ⚡ BREAKOUT BULL → Go LONG - ⚡ BREAKOUT BEAR → Go SHORT **Best scenario:** Breakout from oversold/overbought levels (confluence with exhaustion indicator). --- ### State 3: ↗️ TRENDING UP / ↘️ TRENDING DOWN **Conditions:** - Squeeze: OFF or No Squeeze - Extension: Growing (1σ to 2σ) - Momentum: Sustained strong bars **What's happening:** Trend in progress. Price moving away from averages. **Action:** **HOLD** positions. Let winners run. Don't fight the trend. --- ### State 4: ⚠️ EXTENDED UP / DOWN **Conditions:** - Extension: Above 2σ threshold - Momentum: Still strong (bright bars) - Confluence: May be weak **What's happening:** Price stretched but still has power. Caution zone. **Action:** **CAUTION.** Don't enter new positions. Tighten stops on existing positions. --- ### State 5: 🔴 EXHAUSTION BULL / 🟢 EXHAUSTION BEAR **Conditions:** - Extension: >2σ (touching dashed lines) - Momentum: Fading (bright bars turning dark) - Velocity: Decreasing - Confluence: 3/5 or better **What's happening:** Rubber band stretched to maximum. Trend running out of energy. **Action:** **EXIT** positions. - 🔴 EXHAUSTION BULL → Close LONGS, consider SHORT - 🟢 EXHAUSTION BEAR → Close SHORTS, consider LONG **This is the highest probability reversal signal.** --- ### State 6: ➡️ TRENDING (Neutral Direction) **Conditions:** - Price trending but without clear momentum direction changes **Action:** **HOLD** or wait for clearer signals. --- ### State 7: — NEUTRAL **Conditions:** - Extension near zero - No squeeze - Weak momentum **Action:** No trade. Wait for setup. --- ## How to Read Signals ### Perfect Long Entry (High Confidence ⭐) **Requirements (all must be true):** 1. ⚫→⚪ Squeeze just turned OFF (gray cross) 2. 📊 Momentum bars bright GREEN and rising 3. 🔻 Extension area BELOW lower dashed line (oversold) 4. ⭐ Confluence: 3/5 or more timeframes agree (shown as "🔻" in table) **Visual:** Large green triangle appears **What this means:** Price was oversold across multiple timeframes, consolidated, and is now breaking out upward with fresh momentum. **Entry:** Next candle after signal **Stop Loss:** Below recent consolidation low **Take Profit:** When extension area crosses back above zero, or when exit signal appears --- ### Perfect Short Entry (High Confidence ⭐) **Requirements (all must be true):** 1. ⚫→⚪ Squeeze just turned OFF (gray cross) 2. 📊 Momentum bars bright RED and falling 3. 🔺 Extension area ABOVE upper dashed line (overbought) 4. ⭐ Confluence: 3/5 or more timeframes agree (shown as "🔺" in table) **Visual:** Large red triangle appears **What this means:** Price was overbought across multiple timeframes, consolidated, and is now breaking down with fresh momentum. **Entry:** Next candle after signal **Stop Loss:** Above recent consolidation high **Take Profit:** When extension area crosses back below zero, or when exit signal appears --- ### Exit Signals #### Exit Long (Orange X) **Appears when:** - Extension area reaches upper dashed line (>2σ) - Momentum bars turning from bright green to dark green - Price losing upward velocity **Action:** Close 50-100% of position. Move stop to breakeven on remainder. #### Exit Short (Teal X) **Appears when:** - Extension area reaches lower dashed line (<-2σ) - Momentum bars turning from bright red to dark red - Price losing downward velocity **Action:** Close 50-100% of position. Move stop to breakeven on remainder. --- ### Medium Confidence Signals (Small Triangles) These appear when squeeze is OFF and momentum is directional, but: - Extension is only moderate (not extreme), OR - Confluence is weak (<3/5 timeframes) **How to trade:** - Use smaller position size (50% of normal) - Tighter stops - Only take if other factors align (support/resistance, volume, etc.) --- ## Trading Examples ### Example 1: Classic Squeeze Play into Trend ``` Step 1: CONSOLIDATION (💤) Chart: Price moving sideways for 10-20 candles Indicator: Black cross at zero (Squeeze ON) Extension: Yellow/Lime area near zero line Action: Set alert for Squeeze OFF Step 2: BREAKOUT (⚡) Chart: Strong green candle breaks resistance Indicator: Cross turns GRAY (Squeeze OFF) Bright GREEN momentum bars appear Extension area still near zero or slightly below Signal: Large green triangle appears Action: ENTER LONG Stop loss below consolidation Target: Extension upper line Step 3: TRENDING (↗️) Chart: Series of higher highs and higher lows Indicator: Momentum bars stay bright green Extension area rising toward upper line Area color transitions yellow → orange → red Action: HOLD, trailing stop Step 4: EXHAUSTION (🔴) Chart: Price makes new high but with smaller candle Indicator: Extension area touches upper dashed line Momentum bars turn DARK green (weakening) Orange X appears Table shows "EXHAUSTION BULL" Action: EXIT position Book profits Step 5: REVERSION Chart: Price falls back toward moving averages Indicator: Extension area shrinks back toward zero Red momentum bars appear Action: Wait for next setup ``` **Result:** Caught the entire trend from breakout to exhaustion. --- ### Example 2: Failed Breakout (What NOT to Trade) ``` Situation: - Squeeze OFF (gray cross) ✓ - Momentum bars bright green ✓ - BUT extension area ABOVE upper line (already overbought) ✗ - Confluence shows 1/5 (only one timeframe agrees) ✗ Indicator: Small green triangle (medium confidence) or no triangle What happens: Price makes small move up, then reverses Lesson: Don't chase extended moves even if squeeze fires. Wait for price to be on the RIGHT SIDE of the extension lines. ``` --- ### Example 3: Exhaustion Reversal Trade ``` Step 1: EXTENDED (⚠️) Chart: Strong uptrend for days Indicator: Extension area deep in red zone (>2σ) Momentum still bright green but starting to shorten Table: "EXTENDED UP" / "CAUTION LONG" Action: Watch closely, tighten stops Step 2: EXHAUSTION (🔴) Chart: Price makes final push but with decreasing volume Indicator: Momentum bars turn DARK green Orange X appears Table: "EXHAUSTION BULL" + "4/5 🔺" Action: CLOSE any longs Consider SHORT entry Step 3: SQUEEZE FORMS (Optional) Chart: Price starts consolidating Indicator: Cross turns BLACK (Squeeze ON) Extension area falling toward zero Action: Wait for Squeeze OFF to confirm reversal Step 4: BREAKOUT DOWN (⚡) Indicator: Cross turns GRAY Bright RED momentum bars Large red triangle appears Action: ENTER SHORT (reversal confirmed) ``` **Result:** Exited at the top, caught the reversal. --- ## Configuration Guide ### Recommended Settings by Timeframe #### For 4H Charts (Swing Trading) ``` Squeeze Settings: (defaults are fine) - BB Length: 20 - BB MultFactor: 2.0 - KC Length: 20 - KC MultFactor: 1.5 Exhaustion TFs: - TF1: 15m - TF2: 1h - TF3: 4h - TF4: 12h or Daily - TF5: Daily or Weekly Extension Threshold: 2.0σ Min Confluence: 3/5 ``` #### For 1H Charts (Day Trading) ``` Squeeze Settings: (defaults) Exhaustion TFs: - TF1: 5m - TF2: 15m - TF3: 1h - TF4: 4h - TF5: Daily Extension Threshold: 2.0σ Min Confluence: 3/5 ``` #### For 15m Charts (Scalping) ``` Squeeze Settings: - BB Length: 15 - KC Length: 15 Exhaustion TFs: - TF1: 1m - TF2: 5m - TF3: 15m - TF4: 1h - TF5: 4h Extension Threshold: 2.5σ (higher to avoid noise) Min Confluence: 4/5 (more strict) ``` --- ### Understanding the Table Located in top-right corner: | Row | Meaning | |-----|---------| | **Market State** | Current cycle phase (Consolidation/Breakout/Trending/Exhaustion) | | **Squeeze** | 🔴 ON / 🟢 OFF / 🔵 No | | **Momentum** | ↑ Bull / ↓ Bear / ~ Weak / — Neutral | | **Extension** | Actual value in standard deviations (σ) - NOT scaled | | **Confluence** | How many timeframes agree (X/5 🔺 or 🔻) | | **Velocity** | Speed of extension change (↑ increasing, ↓ decreasing) | | **ACTION** | What to do right now | **Most important rows:** 1. **Market State** - Quick glance at current cycle 2. **Confluence** - Determines signal quality 3. **ACTION** - Direct guidance --- ## Best Practices ### ✅ DO 1. **Wait for High Confidence signals** (large triangles) - Don't trade every small signal - Quality over quantity 2. **Use the complete cycle** - Enter on Breakout (⚡) - Hold through Trending (↗️/↘️) - Exit on Exhaustion (🔴/🟢) 3. **Respect confluence** - 4/5 or 5/5 = Excellent probability - 3/5 = Good probability - 1-2/5 = Skip 4. **Combine with price action** - Support/resistance levels - Volume confirmation - Candlestick patterns 5. **Set alerts** - "Squeeze OFF" - Don't miss breakouts - "HC Long Setup" / "HC Short Setup" - "Exit Long" / "Exit Short" 6. **Scale positions** - Enter 50% on signal - Add 25% if extension confirms - Add final 25% if momentum sustains 7. **Use proper risk management** - Stop loss: Below/above consolidation - Position size: 1-2% account risk - Take profit: Extension targets or signals --- ### ❌ DON'T 1. **Don't trade Consolidation state** - Black cross (Squeeze ON) = Wait mode - No signals during consolidation 2. **Don't chase Extended moves** - If extension already >2σ when Squeeze fires - Even if momentum looks good - Wait for reversion first 3. **Don't fight strong trends** - If extension is growing and momentum strong - Don't counter-trend trade - Wait for exhaustion signals 4. **Don't ignore velocity** - If velocity is ↑ and extension high = still dangerous - If velocity is ↓ and extension high = safer reversal 5. **Don't trade low confluence** - 1/5 or 2/5 = Different timeframes disagree - High chance of false signal 6. **Don't use blindly** - Check overall market context - Major news events can override signals - Trend on higher timeframe matters 7. **Don't overtrade** - Good setups are rare (that's why they work) - Wait for complete setup formation --- ## Quick Reference Card ### Signal Quality Checklist **⭐⭐⭐ PERFECT SETUP (Trade this)** - Squeeze just turned OFF (⚫→⚪) - Momentum bright and directional - Extension >2σ (OPPOSITE direction of entry) - Confluence ≥3/5 - Large triangle signal - Action says "LONG/SHORT ENTRY ⭐" **⭐⭐ GOOD SETUP (Trade with caution)** - Squeeze OFF - Momentum directional - Extension moderate - Confluence ≥3/5 - Small triangle or Action confirms **⭐ WEAK SETUP (Skip)** - Low confluence (<3/5) - Extension same direction as entry - Momentum weak or conflicting - Already in Extended/Exhaustion state --- ### State → Action Quick Guide | See This State | Do This | |---------------|---------| | 💤 CONSOLIDATION | Wait, set alerts | | ⚡ BREAKOUT | Enter in direction | | ↗️/↘️ TRENDING | Hold positions | | ⚠️ EXTENDED | Tighten stops, no new entries | | 🔴/🟢 EXHAUSTION | Exit, consider reversal | | — NEUTRAL | No trade | --- ## Troubleshooting **Q: Indicator shows Exhaustion but price keeps going** **A:** Check velocity and momentum. If still bright bars + velocity ↑, wait. True exhaustion needs momentum weakening. **Q: Too many false signals** **A:** Increase Min Confluence to 4/5. Use longer timeframe chart (4h instead of 1h). **Q: Missing good trades** **A:** Set alerts for "Squeeze OFF" and "HC Entry" signals. You can't watch charts 24/7. **Q: Extension area looks weird** **A:** Remember it's scaled 3x for visibility. Check table for actual values. **Q: Which timeframe is best?** **A:** 4H for swing trading, 1H for day trading. Lower = more signals but more noise. **Q: Can I use this with other indicators?** **A:** Yes! Combine with: - Volume profile - Support/resistance levels - Moving averages on chart - RSI for additional confirmation --- ## Final Thoughts This indicator gives you a complete picture of market structure: - **Where are we?** (Market State) - **Where are we going?** (Momentum) - **How far can it go?** (Extension) - **When will it reverse?** (Exhaustion) The key is **patience**. Wait for the complete setup: 1. Consolidation (⚫ Squeeze ON) 2. Breakout (⚪ Squeeze OFF) 3. Right extension direction (oversold for longs, overbought for shorts) 4. Strong confluence (3/5+) When all pieces align, you get high-probability trades with clear entries, targets, and exits. **Trade the cycle, not every wiggle.** --- ## Support & Updates For questions or suggestions, refer to the original script documentation or TradingView community. **Remember:** No indicator is perfect. Always use proper risk management and combine multiple forms of analysis. **Good trading! 📈**
Indicador Pine Script®
por Marianodipietra
Pivot Move Ranges█ OVERVIEW “Pivot Move Ranges” is an indicator that displays only the historical price ranges of moves that match the direction of the current swing. It measures the price range of each individual swing and draws them as horizontal Δ-boxes positioned at the level of the most recently detected pivot. The indicator operates with a delay equal to the set pivot detection length – after each new Pivot High, only red Δ-boxes appear showing the sizes of previous downward moves; after each new Pivot Low, only green Δ-boxes appear showing the sizes of previous upward moves. When the swing direction changes, the displayed set of levels instantly switches to the opposite direction. █ CONCEPTS The indicator was created to instantly provide the trader with objective, real historical price ranges – perfectly reinforcing classic tools such as Fibonacci extension/retracement, daily/weekly pivots, moving averages, order blocks, or Volume Profile. It detects classic Pivot High and Pivot Low points: - New Pivot High → only previous downward moves are shown (red Δ-boxes) - New Pivot Low → only previous upward moves are shown (green Δ-boxes) This ensures that at any moment you see only the historical ranges that match the current market direction. Price moves very often repeat themselves – the indicator makes these recurring levels immediately visible and ready to serve as natural reinforcement for other technical analysis tools. █ FEATURES - Pivot High / Pivot Low detection with adjustable length (default 12) - Δ-boxes – thin horizontal lines showing the exact size of previous moves that match the current swing - Automatic switching of the Δ-box set whenever a new opposite pivot appears - Memory of the last N moves (default 6, max. 50) – oldest are automatically removed - Labels showing move size (Δ) and start date/time - Full color customization (separate for up and down), border and text transparency - Choice of date format (DD.MM.YYYY or MM/DD/YYYY) - Small circles marking the exact pivot locations █ HOW TO USE Add the indicator to your TradingView chart → paste the code → Add to Chart. Settings: - Pivot Length – higher values = fewer but more significant pivots (detected with a delay equal to this length) - Max Corrections to Keep – how many previous matching moves are displayed at once - Upward / Downward Box Color – colors of the Δ-boxes - Box Border Transparency (%) – 0 = solid lines, 50–70 = subtle - Show Δ Text + Move Start Date – turn labels on/off Interpretation: At any given moment the chart shows only the historical ranges of moves in the current direction: - after a Pivot High → red Δ-boxes = “how far the market previously fell” - after a Pivot Low → green Δ-boxes = “how far the market previously rose” █ APPLICATIONS - Instant reinforcement of technical levels – historical moves matching the current swing direction often coincide with Fibonacci levels, daily/weekly pivots, moving averages, or order blocks - Fast cluster detection – set a high Max Corrections value (30–50) to see where the largest number of similarly sized moves cluster, then reduce to 6–10 and focus only on the most recent levels █ NOTES - On very strong trends, Δ-boxes can be extremely long – this is normal and correct behavior - Always use as a supporting layer alongside other technical analysis tools
Indicador Pine Script®
por Uncle_the_shooter
2
Filter Trend1. Indicator Name Premium EMA Ribbon Filter (Pro Version) (Advanced Trend & Momentum Filtering System Based on EMA Ribbons) 2. One-Line Introduction A professional trend-analysis indicator that blends an advanced noise-filtering algorithm with an EMA ribbon system to extract only the pure bullish/bearish trend while smoothing out market noise. 3. Overall Description (7+ lines) The Premium EMA Ribbon Filter is more than just a set of EMAs. It analyzes the structure of a fast, medium, and slow EMA ribbon—along with the spacing and alignment between them—to determine whether the market is in a bullish trend, bearish trend, or a neutral/noise-heavy zone. The core of this indicator is its noise-reduction algorithm and trend-strength calculation system. Instead of relying on simple EMA cross signals, it evaluates how consistently the ribbon maintains bullish/bearish alignment over a specified period and highlights only strong trends with color coding, while weak or noisy areas are displayed in gray. This helps traders avoid confusing or false signals and clearly focus only on the “meaningful zones.” A Triple-Smoothing System is applied to create smoother, more refined ribbon movements, forming a stable “premium trend curve” that is less affected by short-term volatility. As a result, this indicator works effectively for scalping, swing trading, and long-term trend following—staying true to the principle of removing noise and highlighting only the core market flow. 4. Short Advantages (6 items) ① Complete Noise Filtering Using EMA ribbon comparison + tolerance logic, false reversals are largely eliminated, leaving only stable trend phases. ② Highly Readable Color System Bullish trends are mint, bearish trends are red, and neutral/noise zones are gray—instantly visualizing market conditions. ③ Trend Strength Visualization Not only trend direction but also trend strength is displayed via dynamic color transparency. ④ Smooth, Premium-Style Ribbon Design Triple-smoothing creates a refined, luxury-level smoothness in movement. ⑤ Works Across All Timeframes From 1-minute scalping to daily/weekly macro trend analysis. ⑥ Excellent Real-Trading Compatibility Works extremely well when combined with ATR, SuperTrend, and volume-based indicators. Indicator Manual (Required Section) 📌 Understanding the Core Concept The indicator uses three EMAs (e.g., 20/50/100) arranged as a ribbon to analyze the structural alignment of the trend. When the EMAs are cleanly aligned Top → Middle → Bottom, the market is in a bullish trend. When aligned Bottom → Middle → Top, the market is in a bearish trend. The indicator further evaluates the ribbon spread (gap) and the consistency of alignment to compute trend strength. Noisy market conditions are shaded gray to clearly indicate “uncertain/indecisive” zones. ⚙️ Settings Description Option Description Fast EMA Most sensitive EMA; detects early trend signals Mid EMA Stabilizes the primary trend direction Slow EMA Defines the broader, long-term trend flow Trend Lookback The period used to analyze trend strength Noise Tolerance (%) Higher values = stronger noise removal Smoothing Steps Controls how smooth the ribbon becomes 📈 Example Recognition A bullish continuation/entry scenario forms when: EMAs align in the order Fast → Mid → Slow (top side) Ribbon color shifts into mint (strong bullish trend) The ribbon begins to expand while price stays above the ribbon 📉 Example Recognition A bearish continuation/entry occurs when: EMAs align Fast → Mid → Slow (bottom side) Ribbon color remains red After contracting, the ribbon expands again during renewed downside strength 🧪 Recommended Usage Combine with volume-based indicators (OBV, Volume Profile) → enhanced strong-trend detection Use with SuperTrend or ATR Stop → clearer stop-loss placement Combine with RSI/Stoch → avoid counter-trend entries in overheated conditions Higher leverage traders should use higher tolerance settings 🔒 Cautions EMA ribbons are trend-following tools; signals may weaken in ranging/sideways markets. Never rely solely on this indicator—always confirm with volume, price patterns, or structure. Very low Lookback values may cause excessive re-entry signals. In high-volatility environments, ribbon spacing can contract/expand rapidly—use with caution.
Indicador Pine Script®
por c9indicator
1
Energy Meter (Candle Range/ATR Ratio)Purpose: This indicator is a simple, intuitive way to visualize auction energy — the actual force behind a price move — rather than just its appearance on the chart. It’s built on a single idea: If a bar travels farther than normal in its fixed amount of time, something pushed harder than usual. That “push” is auction energy, and it’s the raw material of microstructure inference: reading intent and imbalance from nothing more than candles, tempo, and volatility. Traditional indicators focus on price patterns or volume. This one focuses on pressure — the underlying imbalance driving each bar. How It Works Each bar’s True Range is divided by its ATR, producing a normalized ratio: 1.0 = Average energy >1.2 (default) = Above-normal energy <1.0 = Quiet, low-pressure bars This ratio is plotted as a histogram to highlight bursts of force, with a smoothed line added to show the tempo of recent energy changes. When the histogram spikes, you’re seeing the auction flash its teeth: aggression, initiative, failed absorption, breakout ignition, or the first punch of a reversal. When the line rolls over, you’re seeing the engine lose torque. It’s a minimalist tool for seeing who is actually winning the auction, even when price looks deceptively calm. Why It Matters Price moves because of imbalance, not geometry. Two candles that look identical can represent completely different internal dynamics. This indicator helps you see: Breakout strength vs. fakeouts Acceleration vs. drift Exhaustion after extended runs Reversal attempts with real intent Quiet absorption before explosive moves Shifts in aggression hidden inside consolidation For new traders, it’s a clean introduction to microstructure inference — extracting meaningful order-flow insights without needing L2, DOM, or volume profile. For experienced traders, it's a compact impulse detector that complements trend, volatility, and liquidity models. Summary This is a lightweight, first-principles tool designed to expose the energy signature of the auction: how hard the market is trying to go somewhere. It doesn’t predict direction — it reveals pressure, so you can judge the quality of the move you’re trading. Energy beats geometry. Intent beats patterns. Microstructure is hiding in every candle; this indicator makes it visible.
Indicador Pine Script®
por scottallen
MA SMART Angle ### 📊 WHAT IS MA SMART ANGLE? **MA SMART Angle** is an advanced momentum and trend detection indicator that analyzes the angles (slopes) of multiple moving averages to generate clear, non-repainting BUY and SELL signals. **Original Concept Credit:** This indicator builds upon the "MA Angles" concept originally created by **JD** (also known as Duyck). The core angle calculation methodology and Jurik Moving Average (JMA) implementation by **Everget** are preserved from the original open-source work. The angle calculation formula was contributed by **KyJ**. This enhanced version is published with respect to the open-source nature of the original indicator. Original indicator reference: "ma angles - JD" by Duyck --- ## 🎯 ORIGINALITY & VALUE PROPOSITION ### **What Makes This Different from the Original:** While the original "MA Angles" by **JD** provided excellent angle visualization, it lacked actionable entry signals. **MA SMART Angle** addresses this by adding: **1. Clear Entry/Exit Signals** - Explicit BUY/SELL arrows based on angle crossovers, momentum confirmation, and MA alignment - No guessing when to enter trades - the indicator tells you exactly when conditions align **2. Non-Repainting Logic** - All signals use confirmed historical data (shifted by 2 bars minimum) - Critical for backtesting reliability and live trading confidence - Original indicator could repaint signals on current bar **3. Dual Signal System** - **Simple Mode:** More frequent signals based on angle crossovers + momentum (for active traders) - **Strict Mode:** Requires full multi-MA alignment + momentum confirmation (for conservative traders) - Adaptable to different trading styles and risk tolerances **4. Smart Signal Filtering** - **Anti-spam cooldown:** Prevents duplicate signals within configurable bar count - **No-trade zone detection:** Filters out low-conviction sideways markets automatically - **Multi-timeframe MA alignment:** Ensures all moving averages agree on direction before signaling **5. Enhanced Visualization** - Large, clear BUY/SELL arrows with descriptive labels - Color-coded backgrounds for market states (trending vs. ranging) - Momentum histogram showing acceleration/deceleration in real-time - Live status table displaying trend strength, angle value, momentum, and MA alignment **6. Professional Alert System** - Four distinct alert conditions: BUY Signal, SELL Signal, Strong BUY, Strong SELL - Enables automated trade notifications and strategy integration **7. Modified MA Periods** - Original used EMA(27), EMA(83), EMA(278) - Enhanced version uses faster EMA(3), EMA(8), EMA(13) for more responsive signals - Better suited for modern volatile markets and shorter timeframes --- ## 📐 HOW IT WORKS - TECHNICAL EXPLANATION ### **Core Methodology:** The indicator calculates angles (slopes) for five key moving averages: - **JMA (Jurik Moving Average)** - Smooth, lag-reduced trend line (original implementation by **Everget**) - **JMA Fast** - Responsive momentum indicator with higher power parameter - **MA27 (EMA 3)** - Primary fast-moving average for signal generation - **MA83 (EMA 8)** - Medium-term trend confirmation - **MA278 (EMA 13)** - Slower trend filter ### **Angle Calculation Formula (by KyJ):** ``` angle = arctan((MA - MA ) / ATR(14)) × (180 / π) ``` **Why ATR normalization?** - Makes angles comparable across different instruments (forex, stocks, crypto) - Makes angles comparable across different timeframes - Accounts for volatility - a 10-point move in different assets has different significance **Angle Interpretation:** - **> 15°** = Strong trend (momentum accelerating) - **0° to 15°** = Weak trend (momentum present but moderate) - **-2° to +2°** = No-trade zone (sideways/choppy market) - **< -15°** = Strong downtrend ### **Signal Generation Logic:** #### **BUY Signal Conditions:** 1. MA27 angle crosses above 0° (upward momentum initiates) 2. All three EMAs (3, 8, 13) pointing upward (trend alignment confirmed) 3. Momentum is positive for 2+ bars (acceleration, not deceleration) 4. Angle exceeds minimum threshold (not in no-trade zone) 5. Cooldown period passed (prevents signal spam) #### **SELL Signal Conditions:** 1. MA27 angle crosses below 0° (downward momentum initiates) 2. All three EMAs pointing downward (downtrend alignment) 3. Momentum is negative for 2+ bars 4. Angle below negative threshold (not in no-trade zone) 5. Cooldown period passed #### **Strong BUY+ / SELL+ Signals:** Additional entry opportunities when JMA Fast crosses JMA Slow while maintaining strong directional angle - indicates momentum acceleration within established trend. --- ## 🔧 HOW TO USE ### **Recommended Settings by Trading Style:** **Scalpers / Day Traders:** - Signal Type: **Simple** - Minimum Angle: **3-5°** - Cooldown Bars: **3-5 bars** - Timeframes: 1m, 5m, 15m **Swing Traders:** - Signal Type: **Strict** - Minimum Angle: **7-10°** - Cooldown Bars: **8-12 bars** - Timeframes: 1H, 4H, Daily **Position Traders:** - Signal Type: **Strict** - Minimum Angle: **10-15°** - Cooldown Bars: **15-20 bars** - Timeframes: Daily, Weekly ### **Parameter Descriptions:** **1. Source** (default: OHLC4) - Price data used for MA calculations - OHLC4 provides smoothest angles - Close is more responsive but noisier **2. Threshold for No-Trade Zones** (default: 2°) - Angles below this are considered sideways/ranging - Increase for stricter filtering of choppy markets - Decrease to allow signals in quieter trending periods **3. Signal Type** (Simple vs. Strict) - **Simple:** Angle crossover OR (trend + momentum) - **Strict:** Angle crossover AND all MAs aligned AND momentum confirmed - Start with Simple, switch to Strict if too many false signals **4. Minimum Angle for Signal** (default: 5°) - Only generate signals when angle exceeds this threshold - Higher values = stronger trends required - Lower values = more sensitive to momentum changes **5. Cooldown Bars** (default: 5) - Minimum bars between consecutive signals - Prevents spam during volatile chop - Scale with your timeframe (higher TF = more bars) **6. Color Bars** (default: true) - Colors chart bars based on signal state - Green = bullish conditions, Red = bearish conditions - Can disable if you prefer clean price bars **7. Background Colors** - **Yellow background** = No-trade zone (low angle, ranging market) - **Green flash** = BUY signal generated - **Red flash** = SELL signal generated - All customizable or can be disabled --- ## 📊 INTERPRETING THE INDICATOR ### **Visual Elements:** **Main Chart Window:** - **Thick Lime/Fuchsia Line** = MA27 angle (primary signal line) - **Medium Green/Red Line** = MA83 angle (trend confirmation) - **Thin Green/Red Line** = MA278 angle (slow trend filter) - **Aqua/Orange Line** = JMA Fast (momentum detector) - **Green/Red Area** = JMA slope (overall trend context) - **Blue/Purple Histogram** = Momentum (angle acceleration/deceleration) **Signal Arrows:** - **Large Green ▲ "BUY"** = Primary buy signal (all conditions met) - **Small Green ▲ "BUY+"** = Strong momentum buy (JMA fast cross) - **Large Red ▼ "SELL"** = Primary sell signal (all conditions met) - **Small Red ▼ "SELL+"** = Strong momentum sell (JMA fast cross) **Status Table (Top Right):** - **Angle:** Current MA27 angle in degrees - **Trend:** Classification (STRONG UP/DOWN, UP/DOWN, FLAT) - **Momentum:** Acceleration state (ACCEL UP/DN, Up/Down) - **MAs:** Alignment status (ALL UP/DOWN, Mixed) - **Zone:** Trading zone status (ACTIVE vs. NO TRADE) - **Last:** Bars since last signal ### **Trading Strategies:** **Strategy 1: Pure Signal Following** - Enter LONG on BUY signal - Exit on SELL signal - Use stop-loss at recent swing low/high - Works best on trending instruments **Strategy 2: Confirmation with Price Action** - Wait for BUY signal + bullish candlestick pattern - Wait for SELL signal + bearish candlestick pattern - Increases win rate by filtering premature signals - Recommended for beginners **Strategy 3: Momentum Acceleration** - Use BUY+/SELL+ signals for adding to positions - Only take these in direction of primary signal - Scalp quick moves during momentum spikes - For experienced traders **Strategy 4: Mean Reversion in No-Trade Zones** - When status shows "NO TRADE", fade extremes - Wait for angle to exit no-trade zone for reversal - Contrarian approach for range-bound markets - Requires tight stops --- ## ⚠️ LIMITATIONS & DISCLAIMERS **What This Indicator DOES:** ✅ Measures momentum direction and strength via angle analysis ✅ Generates signals when multiple conditions align ✅ Filters out low-conviction sideways markets ✅ Provides visual clarity on trend state **What This Indicator DOES NOT:** ❌ Predict future price movements with certainty ❌ Guarantee profitable trades (no indicator can) ❌ Work equally well on all instruments/timeframes ❌ Replace proper risk management and position sizing **Known Limitations:** - **Lagging Nature:** Like all moving averages, signals occur after momentum begins - **Whipsaw Risk:** Can generate false signals in volatile, directionless markets - **Optimization Required:** Parameters need adjustment for different assets - **Not a Complete System:** Should be combined with risk management, position sizing, and other analysis **Best Performance Conditions:** - Strong trending markets (crypto bull runs, stock breakouts) - Liquid instruments (major forex pairs, large-cap stocks) - Appropriate timeframe selection (match to trading style) - Used alongside support/resistance and volume analysis --- ## 🔔 ALERT SETUP The indicator includes four alert conditions: **1. BUY SIGNAL** - Message: "MA SMART Angle: BUY SIGNAL! Angle crossed up with momentum" - Use for: Primary long entries **2. SELL SIGNAL** - Message: "MA SMART Angle: SELL SIGNAL! Angle crossed down with momentum" - Use for: Primary short entries or long exits **3. Strong BUY** - Message: "MA SMART Angle: Strong BUY momentum - JMA fast crossed up" - Use for: Adding to longs or aggressive entries **4. Strong SELL** - Message: "MA SMART Angle: Strong SELL momentum - JMA fast crossed down" - Use for: Adding to shorts or aggressive exits **Setting Up Alerts:** 1. Right-click indicator → "Add Alert on MA SMART Angle" 2. Select desired condition from dropdown 3. Choose notification method (popup, email, webhook) 4. Set alert expiration (typically "Once Per Bar Close") --- ## 📚 EDUCATIONAL VALUE This indicator serves as an excellent learning tool for understanding: **1. Angle-Based Momentum Analysis** - Traditional indicators show MA crossovers - This shows the *rate of change* (velocity) of MAs - Teaches traders to think in terms of momentum acceleration **2. Multi-Timeframe Confirmation** - Shows how fast, medium, and slow MAs interact - Demonstrates importance of trend alignment - Helps develop patience for high-probability setups **3. Signal Quality vs. Quantity Tradeoff** - Simple mode = more signals, more noise - Strict mode = fewer signals, higher quality - Teaches discretionary filtering skills **4. Market State Recognition** - Visual distinction between trending and ranging markets - Helps traders avoid trading choppy conditions - Develops "market context" awareness --- ## 🔄 DIFFERENCES FROM OTHER MA INDICATORS **vs. Traditional MA Crossovers:** - Measures momentum (angle) rather than just price crossing MA - Provides earlier signals as angles change before price crosses - Filters better for sideways markets using no-trade zones **vs. MACD:** - Uses multiple MAs instead of just two - ATR normalization makes it universal across instruments - Visual angle representation more intuitive than histogram **vs. Supertrend:** - Not based on ATR bands but on MA slope analysis - Provides graduated strength indication (not just binary trend) - Less prone to whipsaw in low volatility **vs. Original "MA Angles" by JD:** - Adds explicit entry/exit signals (original had none) - Implements no-repaint logic for reliability - Includes signal filtering and quality controls - Provides dual signal systems (Simple/Strict) - Enhanced visualization and status monitoring - Uses faster MA periods (3/8/13 vs 27/83/278) for modern markets --- ## 📖 CODE STRUCTURE (for Pine Script learners) This indicator demonstrates: **Advanced Pine Script Techniques:** - Custom function implementation (JMA, angle calculation) - Var declarations for stateful tracking - Table creation for HUD display - Multi-condition signal logic - Alert system integration - Proper use of historical references for no-repaint **Code Organization:** - Modular function definitions (JMA, angle) - Clear separation of concerns (inputs, calculations, plotting, alerts) - Extensive commenting for maintainability - Best practices for Pine Script v5 **Learning Resources:** - Study the JMA function to understand adaptive smoothing - Examine angle calculation for ATR normalization technique - Review signal logic for multi-condition confirmation patterns - Analyze anti-spam filtering for state management The code is open-source - feel free to study, modify, and improve upon it! --- ## 🙏 CREDITS & ATTRIBUTION **Original Concepts:** - **"ma angles - JD" by JD (Duyck)** - Core angle calculation methodology and indicator concept Original open-source indicator on TradingView Community Scripts - **JMA (Jurik Moving Average) implementation by Everget** - Smooth, low-lag moving average function Acknowledged in original JD indicator code - **Angle Calculation formula by KyJ** - Mathematical formula for converting MA slope to degrees using ATR normalization Acknowledged in original JD indicator code comments **Enhancements in This Version:** - Signal generation logic - Original implementation for this indicator - No-repaint confirmation system - Original implementation - Dual signal modes (Simple/Strict) - Original implementation - Visual enhancements and status table - Original implementation - Alert system and signal filtering - Original implementation - Modified MA periods (3/8/13 instead of 27/83/278) - Optimization for modern markets **Open Source Philosophy:** This indicator follows the open-source spirit of TradingView and the Pine Script community. The original "ma angles - JD" by JD (Duyck) was published as open-source, enabling this enhanced version. Similarly, this code is published as open-source to allow further community improvements. --- ## ⚡ QUICK START GUIDE **For New Users:** 1. Add indicator to chart 2. Start with default settings (Simple mode) 3. Wait for BUY signal (green arrow) 4. Observe how price behaves after signal 5. Check status table to understand market state 6. Adjust parameters based on your instrument/timeframe **For Experienced Traders:** 1. Switch to Strict mode for higher quality signals 2. Increase cooldown bars to reduce frequency 3. Raise minimum angle threshold for stronger trends 4. Combine with your existing strategy for confirmation 5. Set up alerts for desired signal types 6. Backtest on your preferred instruments --- ## 🎓 RECOMMENDED COMBINATIONS **Works Well With:** - **Volume Analysis:** Confirm signals with volume spikes - **Support/Resistance:** Take signals near key levels - **RSI/Stochastic:** Avoid overbought/oversold extremes - **ATR:** Size positions based on volatility - **Price Action:** Wait for candlestick confirmation **Complementary Indicators:** - Order Flow / Footprint (for institutional confirmation) - Volume Profile (for identifying value areas) - VWAP (for intraday mean reversion reference) - Fibonacci Retracements (for target setting) --- ## 📈 PERFORMANCE EXPECTATIONS **Realistic Win Rates:** - Simple Mode: 45-55% (higher frequency, moderate accuracy) - Strict Mode: 55-65% (lower frequency, higher accuracy) - Combined with price action: 60-70% **Best Asset Classes:** 1. **Cryptocurrencies** (strong trends, clear signals) 2. **Forex Major Pairs** (smooth price action, good angles) 3. **Large-Cap Stocks** (trending behavior, liquid) 4. **Index Futures** (trending instruments) **Challenging Conditions:** - Low volatility consolidation periods - News-driven erratic movements - Thin/illiquid instruments - Counter-trending markets --- ## 🛡️ RISK DISCLAIMER **IMPORTANT LEGAL NOTICE:** This indicator is for **educational and informational purposes only**. It is **NOT financial advice** and does not constitute a recommendation to buy or sell any financial instrument. **Trading Risks:** - Trading carries substantial risk of loss - Past performance does not guarantee future results - No indicator can predict market movements with certainty - You can lose more than your initial investment (especially with leverage) **User Responsibilities:** - Conduct your own research and due diligence - Understand the instruments you trade - Never risk more than you can afford to lose - Use proper position sizing and risk management - Consider consulting a licensed financial advisor **Indicator Limitations:** - Signals are based on historical data only - No guarantee of accuracy or profitability - Parameters must be optimized for your specific use case - Results vary significantly by market conditions By using this indicator, you acknowledge and accept all trading risks. The author is not responsible for any financial losses incurred through use of this indicator. --- ## 📧 SUPPORT & FEEDBACK **Found a bug?** Please report it in the comments with: - Chart symbol and timeframe - Parameter settings used - Description of unexpected behavior - Screenshot if possible **Have suggestions?** Share your ideas for improvements! **Enjoying the indicator?** Leave a like and follow for updates!
Indicador Pine Script®
por Smart-Day-Trader
VWAP CATS background flipped 4.0VWAP CATS Background Flipped 4.0 is a sophisticated Pine Script v5 indicator for TradingView that combines a configurable moving average (MA) with dynamic Gann Square of 9 levels to create a multi-layered background shading system for price action analysis. It visualizes support/resistance zones around a central MA (often VWAP or RVWAP) using incremental offsets (either % or absolute points), generating symmetrical bands that resemble a "CATS" (Concentric Adaptive Tiered System) — hence the name.The background is "flipped" in the sense that shading intensity and structure emphasize higher-tier zones, and labels are placed to the right of the chart for future projection.Key FeaturesFeature Description Multi-MA Engine Supports 20+ MA types: EMA, DEMA, TEMA, SMA, VWAP, RVWAP, HMA, ALMA, custom volume blends (CVB1–4) RVWAP Mode Rolling VWAP with adaptive or fixed time window (days/hours/minutes) Gann Square of 9 Logic Generates 80+ symmetric levels (0.25x to 17x increment) above/below the MA Dual Increment Mode Choose Percent or Points for spacing Background Fills Tiered transparency fills between Gann levels (darker = stronger zones) Visual MA Offset Shift MA line left/right without breaking fill alignment Smart Labels Projected labels on last bar: "FV", "normal", "high", "3/4" at key levels Performance Optimized Hidden plots + label cleanup to prevent lag Primary Use Cases 1. Institutional VWAP Anchoring Use RVWAP (1-day fixed) as maRaw Set Increment = 0.5 points or 0.05% Watch price interaction with "normal" (2x), "high" (4x), "3/4" (6x) zones Ideal for intraday scalping on indices (ES, NQ) or forex 2. Swing Trading with Gann Projections Use 400-period SMA/EMA on daily chart Increment in Percent mode (~1.22%) Identify confluence when price rejects at 2x, 4x, or 6x bands Labels project future targets to the right 3. Volume-Weighted Mean Reversion Select CVB1–CVB4 for heavy volume smoothing Use Points mode for stocks with stable tick sizes (e.g. $0.50 increments) Trade mean reversion between ±1x and ±2x bands 4. Risk Management & Stop Placement Place stops beyond 2x or 4x bands Take profits at next major tier (e.g. 4x → 6x) Pro Tips Enable "Use Fixed Time Period" for RVWAP to avoid session reset issues Increase i_label_offset on lower timeframes to avoid overlap Combine with volume profile or order flow for confluence The "FV" label marks the Fair Value MA — core anchor Summary"VWAP CATS Background Flipped 4.0" turns any moving average into a dynamic Gann-based pricing grid with intelligent background shading and forward-projected labels — perfect for institutional-style mean reversion, swing targeting, and risk-defined trading."
Indicador Pine Script®
por surfchaser
VWAP – Pivot Pairs (SECONDS‑BASED RESET)VWAP – Pivot Pairs (SECONDS-BASED RESET) is a Pine Script v6 indicator for TradingView that combines pivot-based breakout detection with resettable VWAP (Volume Weighted Average Price) calculations over user-defined rolling time periods in seconds.It identifies high and low swing pivots via breakout logic, then calculates two VWAP lines per anchor:One using high/low as the price source, One using close as the price source. These form "pivot pairs" that reset automatically at the start of each custom-duration period (e.g., every 300 seconds), starting from a user-defined UTC time of day (default: 09:30 UTC).Visuals include:Colored VWAP lines (high pair: red, low pair: green), Semi-transparent fill zones between each pair, Optional toggles to show/hide high or low pairs. Use CasesUse Case Description Intraday Scalping (1–15 min charts) Use 60–300 second resets to capture micro-trends within larger sessions. VWAP pairs act as dynamic support/resistance after breakouts. High-Frequency / Algo Validation Backtest strategies on tick/second charts where traditional session resets fail. Align resets with exchange micro-sessions or volatility windows. Opening Range Breakout (ORB) Enhancement Set period_seconds = 1800 (30 min) and start time = 09:30 UTC → VWAP builds only on first 30 mins post-open, then floats. Pairs show deviation from ORB mean. Range-Bound Market Analysis In choppy markets, VWAP pairs converge near fair value. Divergence signals potential breakout. Fill color intensity shows conviction. Multi-Timeframe Confluence Overlay on 1-second chart with 300s reset → matches 5-minute structure. Use close-based VWAP for entries, high/low-based for stops. Key Features SummaryFeature Function period_seconds Rolling window length in seconds (e.g., 300 = 5 min) period_start_time UTC time-of-day anchor (default: 09:30) new_period logic Triggers full reset of pivots + VWAP on exact second boundary breakingHigher / breakingLower Detects confirmed breakouts (not just close above high) Dual VWAP per anchor ta.vwap(high) and ta.vwap(close) for range-aware mean Fill zones Visual value area between high/close VWAPs Toggle visibility Independently show/hide high or low pivot pairs How It Works – Step-by-StepTime Engine Converts user inputs → milliseconds Calculates current period start time using integer division from epoch Detects exact bar when new period begins (new_period = true) On New Period Resets both high/low anchors to current bar’s h and l Forces VWAP recalculation from this bar forward Breakout Detection Only triggers on strong candles (rising/falling, non-doji) Requires open/close beyond prior pivot → avoids wicks-only breaks VWAP Accumulation ta.vwap(source, reset_condition) restarts when anchor resets Two sources per side → shows where volume clustered (at highs vs closes) Plotting Four lines + two fills Clean, customizable, overlay-friendly Pro TipsUse on Heikin Ashi for smoother breakout signals. Combine with volume profile to validate VWAP clusters. For crypto, set period_start_time = 0 (00:00 UTC) for clean 4-hour resets. Add alerts on new_period or breakingHigher for automation. In short: This is a precision VWAP tool for time-boxed, pivot-driven mean reversion and breakout trading, ideal for scalpers, day traders, and algo developers needing sub-session granularity.
Indicador Pine Script®
por surfchaser
VWAP Confluência 3x VWAP Confluence 3x — Daily · Weekly · Anchored Purpose A pragmatic VWAP suite for execution and risk management. It plots three institutional reference lines: Daily VWAP, Weekly VWAP, and an Anchored VWAP (AVWAP) starting from a user-defined event (news, earnings, session open, swing high/low). Why it matters VWAP is the market’s “fair price” weighted by where volume actually traded. Confluence across timeframes and events turns noisy charts into actionable bias and clean levels. What it does Daily VWAP — resets each trading day; intraday “fair value.” Weekly VWAP — resets each week; swing context and larger player defense. Anchored VWAP — starts at a precise timestamp you set (e.g., news release). Price source toggle — Typical Price ( 𝐻 + 𝐿 + 𝐶 ) / 3 (H+L+C)/3 or Close. Visibility switches — enable/disable each line independently. Anchor marker — labels the first bar of the AVWAP. Inputs Show Daily VWAP (on/off) Show Weekly VWAP (on/off) Show Anchored VWAP (on/off) Price Source: Typical (H+L+C)/3 or Close Anchor Time: timestamp of your event (uses the chart/exchange timezone) How to anchor to a news event Find the exact release time as shown in your chart’s timezone. Open the indicator settings → set Anchor Time to that minute. The AVWAP begins at that bar and accumulates forward. Playbook (examples, not signals) Strong long bias: price above Daily and Weekly VWAP; AVWAP reclaimed after news. Strong short bias: price below Daily and Weekly; AVWAP reject after news. Mean-revert zones: price stretches far from the active VWAPs and snaps back; size around VWAP with tight risk. Targets: opposite VWAP, prior day/week highs/lows, or liquidity pools near AVWAP. Best used with Session highs/lows, liquidity sweeps, volume profile, and time-of-day filters. Notes & limitations Works best on markets with reliable volume (equities, futures, liquid crypto). FX spot uses synthetic volume—interpret accordingly. Anchor Time respects the chart’s timezone. Convert news times before setting. This is an indicator, not a backtestable strategy. No trade advice. Disclaimer For educational purposes only. Trading involves risk. Do your own research and manage risk responsibly.
Indicador Pine Script®
por BFAS76
Cnagda Trading ToolCnagda Trading Tools - complete set of intraday trading 1. Trendline breakout based On ATR. 2. Live RSI, volume/candle average 20 Periods, trend direction last 34 periods, and some useful dashboard features. 3. Ma Scalp Line provide trend support and resistance + Where Line More Flat Previous Time You Also Use That Range As Support And Resistance 4. RSI based POC ( Point Of Control) indicate high Volume Area like fixed Range Volume profile 5. London session breakout with buy/sell Signal and NewYork session opening half hour range breakout with Buy/sell signal Ma Scalp Buy And Sell Signal For Short term Scalping ( 5 Min Timeframe) Based on Ema And Wma Crossover I hope these tools will improve your trading, but you should trade only after proper research, this indicator is not responsible for any loss.
Indicador Pine Script®
por cnagda3
10
Multi-Tool Nasdaq US100 IndikatorA combination of several tools such as moving averages (EMA 50, 100, 200), Fibonacci retracements, pivot points, RSI (Relative Strength Index), order blocks, fair value gaps, supply and demand zones, and a simple volume profile. The indicator is designed to enable high profitability by combining various established technical analysis approaches into one tool, facilitating decision-making regarding entry and exit points. The script can be integrated and used directly in TradingView by creating a new indicator script and pasting the code there.
Indicador Pine Script®
por p_kittelmann1945
Liquidity Grab Detector (Stop Hunt Sniper) v2.2📌 Purpose This indicator detects Stop Hunts (Liquidity Grabs) — false breakouts above/below recent highs or lows — filtered by trend direction, volatility, and volume conditions. It is designed for scalpers and intraday traders who want to identify high-probability reversal zones. 🧠 How It Works 1. Key Logic Detects previous swing high / swing low over the Lookback Bars. Marks a false breakout when price moves beyond the level and closes back inside. Requires a volume spike on the breakout to confirm liquidity sweep. 2. Trend Filter (EMA 50) Bullish signals only if price is above EMA 50. Bearish signals only if price is below EMA 50. This removes most counter-trend stop hunts. 3. ADX Filter Signals appear only when ADX < Max ADX (low-trend conditions). This avoids false signals in strong trending markets. 📈 How to Use Green Arrows: Bullish stop hunt (potential long entry). Red Arrows: Bearish stop hunt (potential short entry). Works best in range conditions, liquidity zones, or near session highs/lows. Combine with order flow, volume profile, or price action for extra confirmation. Recommended Timeframes: 1m–15m for scalping; 30m–1h for intraday. Markets: Crypto, Forex, Indices. ⚙️ Inputs Lookback Bars — swing detection Volume Spike Multiplier EMA Length (trend filter) Min Retrace — how much price must return inside range Max ADX — trend filter sensitivity ⚠️ Disclaimer This script is for educational purposes only and does not constitute financial advice. Always test thoroughly before live trading.
Indicador Pine Script®
por artemka3091
1
OHLCVDataOHLCV Data Power Library Multi-Timeframe Market Data with Mathematical Precision 📌 Overview This Pine Script library provides structured OHLCV (Open, High, Low, Close, Volume) data across multiple timeframes using mathematically significant candle counts (powers of 3). Designed for technical analysts who work with fractal market patterns and need efficient access to higher timeframe data. ✨ Key Features 6 Timeframes: 5min, 1H, 4H, 6H, 1D, and 1W data Power-of-3 Candle Counts: 3, 9, 27, 81, and 243 bars Structured Data: Returns clean OHLCV objects with all price/volume components Pine Script Optimized: Complies with all security() call restrictions 📊 Timeframe Functions pinescript f_get5M_3() // 3 candles of 5min data f_get1H_27() // 27 candles of 1H data f_get1D_81() // 81 candles of daily data // ... and 27 other combinations 🚀 Usage Example pinescript import YourName/OHLCVData/1 as OHLCV weeklyData = OHLCV.f_get1W_27() // Get 27 weekly candles latestHigh = array.get(weeklyData, 0).high plot(latestHigh, "Weekly High") 💡 Ideal For Multi-timeframe analysis Volume-profile studies Fractal pattern detection Higher timeframe confirmation ⚠️ Note Replace "YourName" with your publishing username All functions return arrays of OHLCV objects Maximum lookback = 243 candles 📜 Version History 1.0 - Initial release (2024)
Biblioteca Pine Script®
por viorel8
RSI with Trend LinesThe RSI with Trend Lines indicator is a tool designed to analyze the behavior of the Relative Strength Index (RSI) combined with dynamic trend lines. This indicator not only provides the standard RSI reading but also identifies pivot points on the RSI and draws bullish and bearish trend lines based on these points. It also includes customizable options for adjusting trend lines, displaying the RSI moving average, and highlighting key levels such as overbought, oversold, and the center line. This indicator is ideal for finding and identifying clear trends in the RSI and taking advantage of market breakout or consolidation signals. It also includes a table with the POC value, which represents the price level at which the most trading activity has occurred, indicating the highest liquidity and highest trading volume. Key Features: 1. Basic RSI: • Calculates the RSI using a configurable period length (default 14). • Colors the RSI based on its direction (green for rising, red for falling) and its position relative to the center line (50). 2. Key Levels: • Displays overbought (70 and 80), oversold (20 and 30), and the center line (50) levels for easy visual interpretation. 3. RSI Moving Average: • Enables and configures an RSI moving average (SMA, EMA, WMA, or ALMA) to smooth out fluctuations and detect clearer trends. 4. Dynamic Trend Lines: • Identifies pivot points on the RSI and draws bullish and bearish trend lines. • Trend lines can be extended into the future or limited to the visible range. • Includes options to display broken lines (trends that are no longer valid) and customize the style (solid or dashed). 5. Pivot Points: • Displays the high and low pivot points on the chart for a better understanding of trend changes. 6. Advanced Customization: • Adjust the pivot point period. • Control the number of pivot points to consider for trend lines. • Customize the line thickness and style. How to Use the Indicator: 1. RSI Interpretation: • Overbought Zone (RSI > 70): Indicates that the asset may be overvalued and could correct downward. • Oversold Zone (RSI < 30): Suggests that the asset may be undervalued and could rebound. • Centerline Crossover (50): A cross above 50 indicates bullish strength, while a cross below suggests weakness. 2. Trend Lines: • Bullish Lines: Drawn when the RSI forms ascending low pivot points. These lines represent dynamic support. • Bearish Lines: These are drawn when the RSI forms descending high pivot points. These lines represent dynamic resistance. • Broken Lines: When a trend line becomes invalid (the RSI breaks the line), they are displayed in a dotted style to highlight the breakout. 3. Possible Trading Signals: • Buy: When the RSI breaks an upward downtrend line. • Sell: When the RSI breaks a downward uptrend line. • Trend Confirmation: When the RSI stays within a valid trend line, it suggests that the current trend is strong. 4. A chart with the POC value: • The point of control is a price level at which the highest trading volume occurs in a given time period. It is a key component of the Volume Profile indicator, which displays volume by price. • Use of the POC in trading: • The POC is used to identify areas of high interest and liquidity for trading. • The POC provides information about the equilibrium point where buyers and sellers are most evenly matched. • Therefore, it can be considered a zone of interest, meaning it can act as support or resistance.
Indicador Pine Script®
por OskarGallard
18
Advanced Liquidity Trap & Squeeze Detector [MazzaropiYoussef]DESCRIPTION: The "Advanced Liquidity Trap & Squeeze Detector" is designed to identify potential liquidity traps, short and long squeezes, and market manipulation based on open interest, funding rates, and aggressive order flow. KEY FEATURES: - **Relative Open Interest Normalization**: Avoids scale discrepancies across different timeframes. - **Liquidity Trap Detection**: Identifies potential bull and bear traps based on open interest and funding imbalances. - **Squeeze Identification**: Highlights conditions where aggressive buyers or sellers are trapped before a reversal. - **Volume Surge Confirmation**: Alerts when abnormal volume activity supports liquidity events. - **Customizable Parameters**: Adjust thresholds to fine-tune detection sensitivity. HOW IT WORKS: - **Long Squeeze**: Triggered when relative open interest is high, funding is negative, and aggressive selling occurs. - **Short Squeeze**: Triggered when relative open interest is high, funding is positive, and aggressive buying occurs. - **Bull Trap**: Triggered when relative open interest is high, funding is positive, and price crosses above the trend line but fails. - **Bear Trap**: Triggered when relative open interest is high, funding is negative, and price crosses below the trend line but fails. USAGE: - This indicator is useful for traders looking to anticipate reversals and avoid being caught in market manipulation events. - Works best in combination with order book analysis and volume profile tools. - Can be applied to crypto, forex, and other leveraged markets. **/
Indicador Pine Script®
por MazzaropiYoussef
Reversal Opportunity📌 Indicator Description – Reversal Opportunity 🎯 🔍 General Overview The Reversal Opportunity indicator is designed to identify ideal conditions for Reversal Trading, but it does not provide trade entry signals. Instead, it helps traders determine whether the market conditions are favorable for a potential reversal. It is specifically designed for traders who execute Reversal trades (Long or Short) and want a clear indication of whether the market is currently suitable for such setups. 💡 What does this indicator do? - Identifies strong momentum before a reversal (a sharp upward or downward move). - Detects momentum slowdown (decreasing volume and smaller candles). - Checks if the RSI is at an extreme level (above 70 or below 30), indicating potential overbought or oversold conditions. - Displays a table at the top center of the screen with the following key data: - Are the conditions for a reversal met? - Is there a slowdown in momentum? - Is RSI at an extreme level? - Was there strong uptrend momentum before a possible Short Reversal? - Was there strong downtrend momentum before a possible Long Reversal? ⚙️ How Does the Indicator Work? The indicator displays a table in the center of the screen, updating every 5 candles to indicate whether the market conditions are ideal for a reversal trade. 📊 Main Status Row: - ✔ Ideal Reversal Setup → Conditions for a reversal trade are met (not a trade recommendation). - ✖ Not Ideal → Reversal conditions are not met; it may be better to wait. 📌 Key Criteria Displayed in the Table: 1. ⚠️ Momentum Slowdown - Yes → Momentum is weakening (a good sign for reversal trades). - No → The market is still moving strongly, and a reversal might not be ready yet. 2. 📈 RSI Extreme - Yes → RSI is above 70 (overbought) or below 30 (oversold), indicating a potential reversal. - No → RSI is still in a normal range, suggesting that waiting for further confirmation might be wise. 3. 📊 Uptrend Momentum Before Reversal - Yes → There was a strong uptrend over multiple consecutive candles, potentially setting up for a Short Reversal. - No → No strong upward momentum was detected, meaning conditions for a Short Reversal may not be ideal. 4. 📉 Downtrend Momentum Before Reversal - Yes → There was a strong downtrend over multiple consecutive candles, potentially setting up for a Long Reversal. - No → No strong downward momentum was detected, meaning conditions for a Long Reversal may not be ideal. 🛠️ How to Use the Indicator? - If "✔ Ideal Reversal Setup" appears, there is a high probability of a market reversal – use your personal entry strategy for further confirmation. - If Momentum Slowdown = Yes, RSI Extreme = Yes, and strong momentum occurred beforehand, this is an ideal setup for a reversal trade. - If any conditions are missing ("No"), it may be better to wait for further confirmation instead of entering too early. - The indicator does NOT provide trade entries! Use your existing trading system for confirmation before entering a trade. 👥 Who Is This Indicator For? - Reversal traders (entering against the current trend after a strong move). - Intraday traders looking for reversal trades at extreme market levels. - Technical traders who rely on Price Action and Volume for trade setups. ⚠️ Disclaimer: This indicator does not recommend trade entries but provides insight into market conditions. The trader is responsible for risk management and decision-making. It is best used in combination with additional confirmations such as reversal candles, Order Flow, Bookmap, or Volume Profile to improve accuracy. 🚀 The indicator is ready to use – add it to TradingView and get instant feedback on whether the market is ideal for a Reversal trade!
Indicador Pine Script®
por aimandakwaradv
1